QSK23-C760 Industrial Application Engine

QSK23-C760 Industrial Application Engine

Engine ModelQSK23-C760 
Maxi. Rating760 HP @ 1800 RPM
Compression Ratio16 : 1
Type4 Cycle, 6 Cylinder
Fuel SystemCMI MCRS
AspirationTurbocharged & Aftercooled
Emission StandardEuro II
Displacement23.2 L
Bore * Stroke170 mm * 170 mm
Packing Size (L * W * H)2885 mm * 1656 mm * 2029 mm

General Infomation of CCEC QSK23-C760 Industrial Engine

General Infomation of CCEC  QSK23-C760  Industrial Engine
Engine ModelQSK23-C760CPL Code2858
Curve & DatasheetFR5381Rated Power760 HP (567 kW) @ 1800 RPM
Compression Ratio16 : 1Torque Peak2,558 lb-ft (3,468 N-m) @ 1350 RPM
Noise Emissions Top SideN/ARevision2-March-2017
Noise Emissions Right Side105 dBaDisplacement1413 in3(23.2 L)
Noise Emissions Left Side105 dBaFuel SystemHPI Celect
Noise Emissions Front Side103 dBaMaximum low idle speed1200 RPM
Emission CertificationNon-certifiedMinimum low idle speed750 RPM
AspirationTurbocharged and Charge Air CooledMinimum engine speed for full load sustained operation1550 RPM
ConfigurationD893008CX03Maximum continuous powerN/A
Maximum overspeed capabilityN/AMaximum continuous speedN/A
Torque OutputPower OutputFuel Consumption
RPMlb-ftN-mRPMHPkWRPMlb/hp-hrg/kW-hr
850 RPM1338 lb-ft1814 N-m850 RPM216 HP161 kW850 RPM0.358 lb/hp-hr218 g/kW-hr
900 RPM1460 lb-ft1980 N-m900 RPM251 HP187 kW900 RPM0.355 lb/hp-hr216 g/kW-hr
1000 RPM1705 lb-ft2312 N-m1000 RPM325 HP242 kW1000 RPM0.354 lb/hp-hr216 g/kW-hr
1100 RPM1949 lb-ft2642 N-m1100 RPM408 HP304 kW1100 RPM0.343 lb/hp-hr209 g/kW-hr
1200 RPM2192 lb-ft2972 N-m1200 RPM500 HP373 kW1200 RPM0.331 lb/hp-hr202 g/kW-hr
1300 RPM2436 lb-ft3303 N-m1300 RPM603 HP450 kW1300 RPM0.325 lb/hp-hr197 g/kW-hr
1350 RPM2558 lb-ft3468 N-m1350 RPM657 HP490 kW1350 RPM0.324 lb/hp-hr197 g/kW-hr
1400 RPM2515 lb-ft3410 N-m1400 RPM671 HP500 kW1400 RPM0.322 lb/hp-hr196 g/kW-hr
1500 RPM2431 lb-ft3296 N-m1500 RPM695 HP518 kW1500 RPM0.324 lb/hp-hr197 g/kW-hr
1600 RPM2357 lb-ft3196 N-m1600 RPM717 HP535 kW1600 RPM0.325 lb/hp-hr198 g/kW-hr
1700 RPM2284 lb-ft3097 N-m1700 RPM739 HP551 kW1700 RPM0.326 lb/hp-hr198 g/kW-hr
1800 RPM2218 lb-ft3007 N-m1800 RPM760 HP567 kW1800 RPM0.325 lb/hp-hr198 g/kW-hr

Engine Performance Data CCEC QSK23-C760 Industrial Engine

Engine Performance Data CCEC QSK23-C760 Industrial Engine
Governed PowerPeak Torque
Engine Speed1800 RPM1350 RPM
Output Power760 HP567 kW657 HP490 kW
Torque2218 lb-ft3007 N-m2558 lb-ft3468 N-m
Friction HorsepowerN/AN/AN/AN/A
Intake Manifold Pressure54 in-Hg181 kPa38 in-Hg130 kPa
Turbo Comp. Outlet Pressure58 in-Hg195 kPa41 in-Hg137 kPa
Turbo Comp. Outlet Temperature331 deg F166 deg C279 deg F137 deg C
Inlet Air Flow1693 ft3/min799 L/s1138 ft3/min537 L/s
Exhaust Gas Flow3829 ft3/min1807 L/s3030 ft3/min1430 L/s
Exhaust Gas Temperature783 deg F417 deg C948 deg F509 deg C
Heat Rejection to Coolant11374 BTU / min200 kW9952 BTU / min175 kW
Heat Rejection to Ambient3981 BTU / min70 kW3412 BTU / min60 kW
Heat Rejection to Exhaust24624 BTU / min433 kW22179 BTU / min390 kW

Advantages of CCEC QSK23-C760 Industrial Engine

Superior Environmental Adaptability
Optimized design enhances adaptability to high altitudes, extreme temperatures, and complex loads, ensuring stable output under diverse conditions.

  1. Exceptional Performance
    Advanced Fuel Technology
    Incorporates a globally leading high-pressure common rail fuel system and fully electronic control module, achieving ultra-high fuel injection pressure. Combined with a swirl harmonic intake port design and Cummins-proprietary high-pressure ratio turbocharger, it delivers peak power output and transient response.

High Efficiency and Energy Savings
Balances high torque and rapid response with excellent fuel economy, significantly reducing long-term operational costs.

  1. Ultra-Long Durability
    Reinforced Structural Design
    High-strength integrated cylinder block and head minimize mechanical stress, reduce failure rates, and ensure extended service life.

Intelligent Lubrication and Filtration System
Equipped with pre-lubrication, Centriguard centrifugal filters, CENTINEL continuous oil renewal system, and two-stage Fleetguard filters, extending maintenance intervals by 50% and reducing downtime.

  1. High Reliability
    Compact Modular Architecture
    Modular integration lowers component complexity, reduces failure rates, and delivers excellent vibration and noise control.

Stable Full-Condition Output
Maintains optimal performance under altitude variations and load fluctuations, ideal for harsh environments like mining and high-altitude operations.

  1. Eco-Friendly Emissions Compliance
    Clean Combustion Technology
    Optimized combustion chamber design complies with China Non-Road Stage III emission standards without additional aftertreatment, lowering compliance costs.

Certified Environmental Compliance
Authoritative emission certifications ensure readiness for evolving environmental regulations.

  1. Hassle-Free Maintenance
    Smart Diagnostic Tools
    INSITE software (Windows-based) enables intuitive fault diagnosis, real-time monitoring, and faster troubleshooting.

Modular and Universal Design
Highly standardized components support rapid assembly/disassembly and cross-platform compatibility, reducing spare parts inventory and maintenance costs.

Comprehensive Value
Through technological innovation and design optimization, this engine achieves a balance of power, reliability, eco-compliance, and cost-effectiveness. Ideal for non-road applications such as engineering machinery and agricultural equipment, it delivers an efficient, durable, and user-friendly power solution.

Contact BLSH Now!

=