QSK19-C700B Industrial Application Engine
| Engine Model | QSK19-700B |
| Maxi. Rating | 700 HP @ 2100 RPM |
| Compression Ratio | 13.9 : 1 |
| Type | 4 Cycle, 6 Cylinder |
| Fuel System | CMI MCRS |
| Aspiration | Turbocharged & Aftercooled |
| Emission Standard | Euro II |
| Displacement | 19 L |
| Bore * Stroke | 159 mm × 159 mm |
| Packing Size (L * W * H) | 1679 mm * 872 mm * 1616 mm |
General Infomation of CCEC QSK19-C700B Industrial Engine
| General Infomation of CCEC QSK19-C700B Industrial Engine | |||
| Engine Model | QSK19-C700B | Emission Certification | U.S. EPA Tier 3, CARB Tier 3 |
| Advertised Power | 700 HP (522 kW) @ 1800 RPM | Peak Torque | 2199 lb-ft (2981 N.m) @ 1500 RPM |
| Curve & DatAsheet | FR-4564 | Governed Power | 700 HP (522 kW) @ 1800 RPM |
| Compression Ratio | 16 | Packing Size (L * W * H) | 2857 mm * 1415 mm * 1766 mm |
| Type | 4 Cycle In-line 6 Cylinder | Displacement | 1159 in³ (19.0 L) |
| Fuel System | MCRS | Bore * Stroke | 6.25 in * 6.25 in / 159 mm * 159 mm |
| Aspiration | Turbocharged & Air-Air Intercooler | Minimum Low Idle Speed | 600 RPM |
| Configuration | D193101CX03 | Maximum Low Idle Speed | 1200 RPM |
| CPL Code | 3240 | ||
Engine Performance Data CCEC QSK19-C700B Industrial Engine
| Performance Data of CCEC QSK19-C700B Industrial Engine | |||||
| Advertised Power | Advertised Power | ||||
| Engine Speed | 1,800 RPM | Inlet Air Flow | 1,717 ft3/min | 810 L/s | |
| Power Output | 700 HP | 522 kW | Charge Air Flow | 123 lb/min | 56 kg/min |
| Torque Output | 2,042 lb-ft | 2,769 N.m | Exhaust Gas Flow | 4,410 ft3/min | 2,081 L/s |
| Friction Horsepower | 46 HP | 63 kW | Exhaust Gas Temperature | 943 °F | 506 ℃ |
| Intake Manifold Pressure | 66 in-Hg | 223 kPa | Heat Rejection to Ambien Air | 2,680 BTU/min | 47 kW |
| Turbo Comp. Outlet Pressure | 70 in-Hg | 236 kPa | Heat Rejection to Exhaust Gas | 28,300 BTU/min | 498 kW |
| Turbo Comp. Outlet Temperature | 385 °F | 196 ℃ | Heat Rejection to HTC Coolant | 9,930 BTU/min | 175 kW |
Advantages of CCEC QSK19-700B Industrial Engine
Superior Environmental Adaptability
Optimized design enhances adaptability to high altitudes, extreme temperatures, and complex loads, ensuring stable output under diverse conditions.
- Exceptional Performance
Advanced Fuel Technology
Incorporates a globally leading high-pressure common rail fuel system and fully electronic control module, achieving ultra-high fuel injection pressure. Combined with a swirl harmonic intake port design and Cummins-proprietary high-pressure ratio turbocharger, it delivers peak power output and transient response.
High Efficiency and Energy Savings
Balances high torque and rapid response with excellent fuel economy, significantly reducing long-term operational costs.
- Ultra-Long Durability
Reinforced Structural Design
High-strength integrated cylinder block and head minimize mechanical stress, reduce failure rates, and ensure extended service life.
Intelligent Lubrication and Filtration System
Equipped with pre-lubrication, Centriguard centrifugal filters, CENTINEL continuous oil renewal system, and two-stage Fleetguard filters, extending maintenance intervals by 50% and reducing downtime.
- High Reliability
Compact Modular Architecture
Modular integration lowers component complexity, reduces failure rates, and delivers excellent vibration and noise control.
Stable Full-Condition Output
Maintains optimal performance under altitude variations and load fluctuations, ideal for harsh environments like mining and high-altitude operations.
- Eco-Friendly Emissions Compliance
Clean Combustion Technology
Optimized combustion chamber design complies with China Non-Road Stage III emission standards without additional aftertreatment, lowering compliance costs.
Certified Environmental Compliance
Authoritative emission certifications ensure readiness for evolving environmental regulations.
- Hassle-Free Maintenance
Smart Diagnostic Tools
INSITE software (Windows-based) enables intuitive fault diagnosis, real-time monitoring, and faster troubleshooting.
Modular and Universal Design
Highly standardized components support rapid assembly/disassembly and cross-platform compatibility, reducing spare parts inventory and maintenance costs.
Comprehensive Value
Through technological innovation and design optimization, this engine achieves a balance of power, reliability, eco-compliance, and cost-effectiveness. Ideal for non-road applications such as engineering machinery and agricultural equipment, it delivers an efficient, durable, and user-friendly power solution.
