CCEC KTA19 – M600 Marine Engine
| Engine Model | KTA19 – M600 |
| Advertised Power | 447 kW (600 HP) @ 1800 RPM |
| Compression Ratio | 14.5 : 1 |
| Type | 4 Cycle; 6 Cylinder |
| Fuel System | PT |
| Aspiration | Turbocharged & Aftercooled |
| Emission Standard | Euro II |
| Displacement | 14L |
| Bore * Stroke | 159 mm * 159 mm |
| Packing Size (L * W * H) | 1534 mm * 781 mm * 1355 mm |
General Infomation of CCEC KTA19 – M600 Marine Engine
| General Infomation of CCEC KTA19 – M600 Marine Main Engine | |||
| Engine Model | KTA19 – M600 | Configuration | D193080MX02 |
| Curve No. | M – 489 | CPL Code | CQ415 |
| Displacement | 1150 in3 / 19 L | Bore * Stroke | 159 mm * 159 mm / 6.25 in * 6.25 in |
| Fuel System | PT | Cylinders | 6, in Line |
| Advertised Power | 447 kW (600 HP) @ 1800 RPM | Aspiration | Turbocharged & Water – Air Intercooler |
| Rating Type | Continuous | Peak Engine Torque @ 1500 RPM | 1926 lb.ft / 2612 N.m |
| Brake Mean Effective Pressure | 227 PSI / 1568 kPa | Minimum Idle Speed Setting | 625 – 675 RPM |
| Normal Idle Speed Variation | ± 25 RPM | High Idle Speed Range Minimum | 1915 RPM |
| High Idle Speed Range Maximum | 2106 RPM | Compression Ratio | 14.5 : 1 |
| Piston Speed | 1870 ft/min / 9.5 m/sec | Weight (Dry) – Engine Only – Average | 4566 lb. / 2073 kg |
| Weight (Dry) – Engine With Heat Exchanger System – Average | 4958 lb. / 2251 kg | Installation Diagram No | N / A |
Scopes of Supply CCEC KTA19 – M600 Marine Engine
| Scopes of Supply of CCEC KTA19 – M600 Marine Main Engine | |||
| Exhaust System | 1. Silencer | Lubricating System | 1. Oil Pump |
| 2. Bellows | 2. Oil Filter | ||
| Fuel System | 1. Fuel Pump | Starting System | 1. Starter Motor |
| 2. Oil Cut Solenoid Valve | 2. Fywheel Housing | ||
| 3. Fuel Filter | 3. Flywheel | ||
| Charging System | 1. Alternator | Control System | 1.Stadnby Control Panel |
| Cooling System | 1. Seawater Pump | ||
| 2. Heat Exchanger | |||
System Technical Data of CCEC KTA19 – M600 Marine Engine
| System Technical Data of CCEC KTA19 – M600 Marine Main Engine | ||
| Fuel System | Avg. Fuel Consumption – ISO 8178 E3 Standard Test Cycle | 20.7 GAL/hr / 78.2 L/hr |
| Fuel Consumption at Rated Speed | 29.0 GAL/hr / 109.9 L/hr | |
| Approximate Fuel Flow to Pump | 87 GAL/hr / 330 L/hr | |
| Maximum Allowable Fuel Supply to Pump Temperature | 140 °F / 60 °C | |
| Approximate Fuel Flow Return to Tank Temperature | 126 °F / 52 °C | |
| Maximum Heat Rejection to Drain Fuel | N / A | |
| Fuel Pressure – Pump Out / Rail Mechanical Gauge | 153 PSI / 1054 kPa | |
| Air System | Intake Manifold Pressure | 60 in. Hg / 203 kPa |
| Intake Air Flow | 1383 CFM / 653 L/sec | |
| Heat Rejection to Ambient | 1081 BTU/min / 19 kW | |
| Exhaust System | Exhaust Gas Flow | 3440 CFM / 3440 L/sec |
| Exhaust Gas Temperature (Turbine Out) | 781 °F / 416 °C | |
| Heat Rejection to Exhaust (Manifold) | 1029 °F / 554 °C | |
| Emsission (in accordance with ISO 8178 Cycle E3) | ||
| NOx (Oxides of Nitrogen) | 5.07 g/HP.hr / 6.8 g/kW.hr | |
| Cooling System | Sea Water Pump Specifications | MAB 0.08.17 – 07 / 16 / 2001 |
| Pressure Cap Rating (With Heat Exchanger Option) | 7 PSI / 50 kPa | |
| Engines with Low Temperature Aftercooling (if applicable) – Main Cooler | ||
| Coolant Flow to Engine Heat Exchanger / Keel Cooler | 141 GAL / 534 L/min | |
| Standard Thermostat Operating Range (Start to Open) | 180 °F / 82 °C | |
| Standard Thermostat Operating Range (Full Open) | 203 °F / 95 °C | |
| Heat Rejection to Engine Coolant3 | 10815 BTU/min / 190 kW | |
| Engines with Low Temperature Aftercooling (if applicable) – LTA Cooler | ||
| Coolant Flow to Engine Heat Exchanger / Keel Cooler | 25 GAL / 95 L/min | |
| Standard Thermostat Operating Range (Start to Open) | 156 °F / 69 °C | |
| Standard Thermostat Operating Range (Full Open) | 172 °F / 78 °C | |
| Heat Rejection to Engine Coolant3 | 5977 BTU/min / 105 kW | |
| Maximum Coolant Inlet Temperature from LTA Cooler | 145 °F / 63 °C | |
CCEC KTA19 – M600 Marine Engine Product Advantages
Excellent Durability
The cylinder block and head adopt high-strength integrated design, reducing failure rates. Durable and has earned an excellent reputation.
Outstanding Performance
Equipped with an advanced PT fuel system and ultra-high injection pressure, it features unique advantages such as overspeed protection, low-pressure fuel supply, fewer pipelines, and low failure rates. This ensures optimal fuel atomization and efficient combustion, delivering high energy-saving performance. The STC oil timing control valve precisely adjusts timing, improving combustion and reducing smoke emissions during low-idle conditions.
Exhaust System
Chongqing Cummins marine engines are designed with a rational exhaust system. The wet turbocharger and water-cooled exhaust pipes effectively reduce surface temperatures, complying with SOLAS safety regulations.
Easy Maintenance
Modular design with compact and integrated components. Parts are detachable with high reusability. Shared platform design ensures high parts commonality.
Emission Compliance
Compliant with IMO Tier II emission standards. Features a marine-optimized turbocharger and intercooler from Chongqing Cummins, paired with low-temperature intercooling technology. This enhances operational efficiency, reduces fuel consumption and emissions, and improves engine reliability.
Classification Society Certifications
Certified by multiple international classification societies, including CCS and BV.
